GLOB TOP - SILIKAT GRUNT
Silicate agent for silicate plasters primer coating.
Type of material:
Water solvable silicate primer for silicate plasters. Contains soft quartz sand. Water dispersion of the potassic water glass Practically use as a ground impregnator, primer and a solvent for silicate plasters.
Application:
Mix before application. Use brushes or rollers.
Don't use below +5C deg and above + 30 C deg.
ATTENTION: mentioned thermal interval regards also to the wall temperature !!Do not lay in high temperatures and on the surfaces directly solar exposed. Use covers. Protect the surfaces not to be painted, especially: glass, stone, clinker brick, wood, aluminum. It is because the primer caustic properties.
Safety regulations::
1.Use the safety goggles. 2.Use the safety gloves. In case of the eye pollution, clean them up with plenty of water.
Efficiency:
Ca. 0,3 - 0,4kg/m2 per one layer.
If necessary lay on the second layer. It is recommended to make a test before lying onto the wall.
Tools:
Brushes, rollers, airless hydrodynamic units.Clean tools at once after finishing the work.Use water as the solvent.
Thermal terms of application:
Don't use below +5 C deg and above + 30 C deg.
ATTENTION:
mentioned thermal interval regards also to the wall temperature!!
Package:
Bucket 25 kg
1 Pallet = 24 buckets = 600 kg net = 630 kg gross
S2
Keep locked up and out of the reach of children.
S24/25
Avoid contact with skin and eyes.
S26
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39
Wear suitable protective clothing, gloves and eye/faceprotection..
S45
In case of accident or if you feel unwell, seek medical advice. (Show the label where possible)
S36/37/39
Avoid release to the environment. Refer to special instructions /Safety data sheets.
